When you’re done, measure the floor frame diagonally. Make sure you use two screws on each corner. To build your base kit, begin by putting together the four corners of your shed’s floor frame. Otherwise, you’ll need to pour your concrete slab or build your wood base before moving on. If you’re using a kit, follow the procedure below. This elevates your shed and is the perfect foundation for a plywood floor finish. Some sheds, like the Arrow Metal Shed, are available with a base kit. Your shed will be more level if it’s built on a foundation and both your shed and the items inside will be better protected if it’s up off the ground. You can also put your shed directly on the ground, if you prefer. When you order your shed, you’ll need to decide whether you’ll use a shed base kit, a floor frame kit, a concrete slab, or a wood base. Once at least two days have passed, double-check to make sure the area is still level before moving on to the next step. If you don’t get rainfall during that time, mist the area with water. It’s best to let the soil settle for at least 48 hours. When you’re done, use a plate compactor or a tamper to compact the soil. Check frequently along the way to ensure the ground stays level. Use your level and measuring tape to determine the areas where you need to add more soil. Next, add topsoil and use a garden rake to spread it evenly. Leveling the area will be easier if you remove the grass first, using a shovel. This will typically be your starting point, and you’ll build the rest of the ground up to this level. Attach a string level and use it to determine the high point. Start by staking off the area with wooden stakes and attaching string between them. If not, you’ll need to take some steps to prepare the land first. Step 2: Level the Groundīefore you begin assembling your metal shed, make sure the ground is square and level. For everyone’s safety, make sure everyone working on your shed installation has protective glasses and thick gloves. It’s also best if you have at least one other person on hand to help. Check the weather and make sure you’ll have at least a few hours with no rain showers or gusty winds. Your shed installation will go much smoother if you choose a clear, calm day. If you need to level the ground, you’ll also need wooden stakes, string, a string level, a garden rake, and a tamper or plate compactor. You’ll want to make sure you have a power drill or driver, a tape measure, and a nail gun. This will help you ensure nothing is missing before you start the shed installation process. To make sure you’re fully prepared, read through the manufacturer’s installation instructions. Also, make sure there aren’t any low-hanging branches or utility lines in the way and that you won’t run into trees, shrubs, or other landscaping. There should be at least a couple of feet of room on each side, so you’re able to easily reach all areas to do maintenance as needed in the future. Next, make sure you have a space large enough to accommodate your structure. Check with your homeowner’s association and your local municipality to make sure you’ve got all your ducks in a row. The first step to shed installation should be checking to make sure you have all the permits you need. Follow these steps and you’ll have your new shed up and ready to enjoy in no time! Step 1: Prepare for Shed Installation While each type of metal shed will have its own specific installation instructions, the general process is the same. In fact, you don’t need any DIY know-how or fancy tools to complete your shed installation. Luckily, metal shed installation is quite simple. But, before you can enjoy all the benefits, you need to build your new shed. Whether your need convenient, on-site storage or you want to create a man cave, there are many practical reasons to add a metal shed to your property.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |